|The current versions of the Warrior Docker image and the Warrior virtual machine image should now be compatible with most projects; however some projects may still not be compatible and show a blank screen when attempting to run them. As an alternative, you can run individual projects manually using Docker.
If you have any issues or feedback, see the AT #warrior IRC channel on hackint.
What is the Archive Team Warrior?
The Archive Team Warrior is a virtual archiving appliance. You can run it to help with the Archive Team archiving efforts. It will download sites and upload them to our archive—and it’s really easy to do!
The warrior is a container running inside a virtual machine, so there is almost no security risk to your computer. "Almost", because in practice nothing is 100% secure. The warrior will only use your bandwidth and some of your disk space, as well as some of your CPU and memory. It will get tasks from and report progress to the Tracker.
The Warrior runs on Windows, macOS, and Linux. You can run it using a virtual machine (simplest) or using Docker (slightly more complicated, but much less overhead than the VM).
Installing and running with a virtual machine
- The Warrior Appliance (size: 123MB, current version: 3.2), from one of the following locations:
- Archive Team
- Syping Development (DE)
- Internet Archive (outdated but still functional)
- A virtualization application to run it, such as:
- VirtualBox (recommended, open source)
- VMware Player (may have some compatibility issues, free-gratis for personal use)
- Download the appliance from the link above.
- Launch VirtualBox.
- In VirtualBox, click
File > Import Applianceand open the file.
- Start the virtual machine.
- It will fetch the latest updates and will eventually tell you to start your web browser.
- Using your regular web browser, visit http://localhost:8001/.
A video demonstrating these steps is available. (Note that the screen indicating that the Warrior has finished loading looks different than the one from when this video was made, but the steps are otherwise the same.)
Note that VMware Player may have some compatibility issues with running the Warrior image.
- Download the appliance from the link above.
- Launch VMware Player.
- In Player on the right, click "Open Virtual Machine", open the file and import the virtual machine.
- (Optional) Select the virtual machine and click "Edit virtual machine settings".
- Select Network Adapter and set it to "Bridged: Connected directly to the physical network"
- Start the virtual machine.
- It will fetch the latest updates and will eventually tell you to start your web browser.
- Using your regular web browser, visit the address that is shown on the bottom (e.g. http://192.168.0.100:8001/)
Installing and running with Docker
You'll need Docker (open source) and the Warrior Docker image.
- Download Docker from the link above and install it.
- Open your terminal. On Windows, you can use either Command Prompt (CMD) or PowerShell. On macOS and Linux you can use Terminal (Bash).
- Use the following command to start the Warrior as well as Watchtower, which will automatically keep your Warrior updated:
docker run --detach --name watchtower --restart=on-failure --volume /var/run/docker.sock:/var/run/docker.sock containrrr/watchtower --label-enable --cleanup --interval 3600 && docker run --detach --name archiveteam-warrior --label=com.centurylinklabs.watchtower.enable=true --restart=on-failure --publish 8001:8001 atdr.meo.ws/archiveteam/warrior-dockerfileNote that the current version of this command may not persist Warrior configuration (username, selected project, and item concurrency) across container/dependency updates unless they are specified in environment variables. These types of updates typically only occur once every few months and are far less frequent than normal script updates, which happen inside the container without affecting the container configuration. (For a full explanation of this command, see items 3 and 4 here.)
You may wish to protect the web configuration interface for your Warrior by setting a username and password for the web interface and by adding a rule to your firewall (such as ufw).
- Using your regular web browser, visit http://localhost:8001/.
Installing and running with Podman
You'll need podman & systemd installed for this. This uses the same image as docker above, but uses podman instead of docker and replaces Watchtower with podman-auto-update. A volume named `at-warrior-projects` is created with the persistent state used for the Warrior. As a result, restarts of the container/auto-updates preserve previous configuration.
podman create --name at-warrior --label=io.containers.autoupdate=registry --publish 8001:8001 --volume at-warrior-projects:/home/warrior/projects atdr.meo.ws/archiveteam/warrior-dockerfile mkdir -p ~/.config/systemd/user podman generate systemd --new at-warrior >~/.config/systemd/user/at-warrior.service systemctl --user daemon-reload systemctl --user enable --now at-warrior.service systemctl --user enable --now podman-auto-update.timer
Many systems don't leave user processes running after logout by default, which causes the podman containers to stop when you log out. This can be mitigated by enabling lingering:
sudo loginctl enable-linger $USER
Why a virtual machine/container in the first place?
The Warrior is a quick, safe, and easy way for newcomers to help us out. It offers many features:
- Graphical interface (virtual machine only)
- Automatically selects which project is important to run
- Self-updating software infrastructure
- Allows for unattended use
- In case of software faults, your machine is not ruined
- Restarts itself in case of runaway programs
- Runs on Windows, Mac, and Linux painlessly
- Ensures consistency in the archived data regardless of your machine's quirks
- Can be configured to restart automatically after a system restart (see below).
If you have suggestions for improving this system, talk to us.
Can I use whatever internet access for the Warrior?
No. We need "clean" connections. Please ensure the following:
- Use a DNS server that issues correct responses. Pinging a nonexistent domain should never return any IP, it should return NXDOMAIN. As an example, before 2014 OpenDNS redirected requests for nonexistent domains to a search page with ads. This is not clean. Another example of an "unclean" DNS is CleanBrowsing which aims to shield its users from fap material. The DNS should preferably not attempt to filter anything, not even phishing domains. 188.8.131.52 from Quad9 may be a good public DNS. 184.108.40.206 from Google should be unfiltered as well.
- No ISP connections that inject advertisements into web pages or otherwise scan/filter/change content. The practice is less common nowadays as most sites use SSL which complicates injection. Doesn't stop some parties from trying anyway.
- No proxies. Proxies can return bad data. The original HTTP headers and IP address are needed for the WARC file.
- No content-filtering firewalls.
- No major censorship. If you believe your country implements major censorship, do not run a warrior. Examples are China and Turkey. What content may or may not be accessible is unpredictable in these countries, and requests may return a page that says "this website is blocked" which is unhelpful to archive. "Minor" censorship is far more common: where a small number of sites are blocked, the blocks are widely announced and blocks are not frequently implemented. For example, several countries have blocked The Pirate Bay and a ruling from the European Commission requires European providers to block access to RT and Sputnik. Another example of "minor" censorship is when access is blocked to sites you wouldn't want to archive in a million years, like those dedicated to hosting imagery of child abuse. While censorship is always a bad idea (and abusive sites should be shut down, not blocked), "minor" censorship typically won't (..or shouldn't) affect Warrior as the blocks are predictable. Obviously you won't be able to contribute to archiving sites that are blocked for you. When in any doubt, ask on IRC first.
- No Tor. The server may return an error page instead of content if they ban exit nodes.
- No free cafe/public transport/store wifi. Archiving your cafe's wifi service agreement repeatedly is not helpful. In addition, you may slow down the service for the people around you.
- No VPNs. Data integrity is a very high priority for the Archive Team so use of VPNs with the official crawler is discouraged. Servers may also be more likely to deploy a rate limit or serve a CAPTCHA page when using a VPN which is unhelpful to archive.
- We prefer connections from many public unshared IP addresses if possible. If a single IP attempts to back up an entire site, it may result in that IP getting banned by the server. Also, if a server does ban an IP, we'd rather this ban only affects you and not everyone in your apartment building.
I turned my Warrior off. Will those tasks be lost?
If you've killed your Warrior, then the work it was doing has been lost. However, the tasks will be returned to the pool after a period of time, and other warriors may claim them.
I closed my browser or tab with the Warrior's web interface. Will those tasks be lost?
No. The web browser interface just provides a user interface to the Warrior. As long as the VM or Docker container is not stopped, it will continue normally.
How can I shut down the Warrior without losing work?
Click the "Shut down" button on the left of the web interface. All the current tasks will still finish, but no new ones will be started. When a banner appears saying "There is no connection with the warrior", the Warrior has finished shutting down. (If you would rather use the command line than the web interface, see below).
Suspend/resume with the virtual machine
If you don't want to wait (perhaps because a task is long-running), you can use VirtualBox's
Machine > Pause or VMware's
VM > Pause to suspend the Warrior VM, then resume it when you are ready to work again. Note that if you keep it suspended for too long (more than a few hours), the tracker will assume that the item is lost and re-queue it—but suspending in order to reboot your computer or reset your internet connection should be perfectly fine.
Suspend/resume with the Docker container
If you don't want to wait, you're out of luck; Docker does not have a feature for suspending containers.
How much disk space will the Warrior use?
Short answer: it depends on the project. The virtual machine has a hard limit of 60GB disk usage, but the Docker container does not have such a limit. However, it is highly unlikely that any project would use more than 60GB of disk space at any time.
Long answer: because each project defines items differently, sizes may vary. A single task may be a small file or a whole subsection of a website. The virtual machine is configured by default to use an absolute maximum of 60GB, but Docker has no hard limit. Any unused virtual machine or Docker container disk space is not used on the host computer. You may configure the virtual machine to run on less than 60GB if you like to live dangerously. We're downloading the internet, after all!
How can I log into the Warrior?
Unless you know what you are doing, you should not need to do this.
With the Warrior running, press ALT+F4 to switch to virtual console number 4. VirtualBox users may need to press the host key, RIGHT_CONTROL, to enter capture mode before pressing ALT+F4. Use ALT+Left or ALT+Right to switch between virtual consoles. There are 6 virtual consoles in total. Consoles 1, 2, and 3 are reserved for the warrior. Switching to a new virtual console will show a login shell. You can login using the username
root and the password
With the Warrior running, open your terminal and run
sudo docker exec -t -i archiveteam-warrior /bin/bash. Replace 'archiveteam-warrior' with the name of your Warrior container if necessary.
How can I run multiple Warriors at the same time?
This usually isn't necessary; if you want to increase your work on a project, you can increase the number of items your Warrior will work on at the same time. In the web interface, go to the "Your settings" tab, tick the "Show advanced settings" box, and edit the "Concurrent items" field. The maximum concurrency is 6.
You'll need to adjust the networking settings.
In VirtualBox, select a virtual machine and open up
Settings > Network > Adapter 1 > Port Forwarding. You need to adjust the host port. For example, setting your table to
TCP | 127.0.0.1 | 8123 | | 8001 will map port 8123 on the host machine (your computer) to port 8001 on the virtual machine (the warrior), and you can then access the warrior's web interface from port 8123 in your browser.
VMware installations should be using bridged networking. However, if you want, you can switch to NAT (under
Settings > Hardware > Virtual Network Adapter) and click Edit to set up port forwarding. On Linux, you can also use lines like
8123 = 192.168.0.100:8001 in the
[incomingtcp] section of nat.conf. (Make sure the VM IP is correct!)
Each VM you want to access should have a different host port. Do not use port numbers below 1024 unless you know what you are doing.
You'll need to adjust the run command used to create the containers.
First, each container needs a unique name, so you will need to replace the name specified with the
--name parameter with something unique.
Second, you will need to specify a unique port to access the web interface of each container. You can do this by changing the number before the
: in the
--publish parameter to any available unique port number equal to or greater than 1024. (Additional options for specifying ports are explained in the Docker documentation.)
You may also want to reuse your configuration between different Docker containers; you can do this by specifying the same environment variables or bindmounting the same
config.json file across all of your containers. See the Warrior Dockerfile README for more details about this.
How can I run the Warrior headlessly (without leaving a window open)?
From the VirtualBox GUI, after opening the VM, click
Machine > Detach GUI. You can then close the VirtualBox Manager window.
For the VirtualBox CLI, you can start up the VM with
VBoxManage startvm archiveteam-warrior-3.2 --type headless and shut it down with
VBoxManage controlvm archiveteam-warrior-3.2 acpipowerbutton. Substituting
acpipowerbutton suspends or resumes the VM. For more information, consult the VirtualBox manual (Chapter 8, Sections 12 and 13).
For the VMware CLI, you can start up the VM with
vmrun start <path to vmx file> nogui and shut it down with
vmrun stop <path to vmx file> soft. Substituting
stop suspends the VM; resume with
start again. For more information, including the paths to VMX files on different operating systems, consult Using vmrun to Control Virtual Machines (PDF), pages 10 and 11.
The container does not have a GUI, and if run with
--detach (as the instructions suggest), it will not occupy your terminal window either. It is therefore headless by default. You can start up the container with
docker start archiveteam-warrior and shut it down with
docker kill --signal=SIGINT archiveteam-warrior.
How can I set up the Warrior to start up on boot and shut down automatically?
If you are using VirtualBox and running a Linux distribution that uses the systemd init system (like most recent releases), you can set the VM up as a system service by following the short instructions on this page. (The page title specifies Arch Linux, but this will work for other distros as long as they run systemd.)
If the container is run with
--restart=on-failure (as the instructions suggest), Docker will automatically start it on boot.
Additionally, you'll want to specify a project, e.g.
-e SELECTED_PROJECT=auto and likely a nickname, e.g.
-e DOWNLOADER=MyCoolNickname. See /Docker environment variables for more info.
How can I set up the virtual machine with directly-bridged networking instead of NAT?
On VirtualBox, use these commands:
VBoxManage modifyvm archiveteam-warrior-3.2 --nic1 bridged VBoxManage modifyvm archiveteam-warrior-3.2 --bridgeadapter1 eth0
We presume you want to bind to
eth0. Adjust as required. :)
VMware installations should already be using bridged networking.
How can I access the virtual machine from another device on my network?
Full guide for VirtualBox users is found here.
What's new in version 3.2 of the Warrior virtual machine?
This update enables running newer projects, shortens startup times, enables viewing basic logs from the virtual machine console (press ALT+F2 for Warrior logs, press ALT+F3 for automatic updater logs, and press ALT+F1 to return to the splash screen), and has other minor improvements. Warriors versions 3.0 and 3.1 will automatically update themselves with the project compatibility improvements, but the other improvements require re-creating the VM with version 3.2 of the appliance.
Are previous versions of the Warrior still supported?
Currently, versions 3.0, 3.1, and 3.2 of the Warrior virtual machine are functional and supported, and are capable of automatically retrieving updated components as needed. Support for version 2 and prior of the Warrior virtual machine was discontinued around 2018 due to outdated SSL support.
We always recommend using the latest version of the Warrior Docker image, as new and updated projects often require the updated components provided by newer Docker images. If you run the Docker container with Watchtower (as the instructions suggest), your Docker container will automatically be kept up-to-date.
Can I run the Warrior on ARM or some other unusual architecture?
No, currently we do not allow ARM (used on Raspberry Pi and M1 Macs) or other non-x86 architectures. This is because we have previously discovered questionable practices in the Wget archive-creating components and are not confident it runs under different endiannesses etc. If you still want to run it apparently Docker can emulate x86_64.
How can I run tons of Warriors easily?
We assume you've checked with the current Archive Team project leads what concurrency and resources are needed or useful!
Whether your have your own virtual cluster or you're renting someone else's (aka a "cloud"), you probably need some orchestration software.
Archive Team volunteers have successfully used a variety of hosting providers and tools (including free trials on AWS and GCE), often just by building their own flavor of virtual server and then repeating it with simple cloud-init scripts or whatever tool the hosting provides. If you desire full automation, the archiveteam-infra repository by diggan helps with Terraform on DigitalOcean.
Some custom monitoring scripts also exist, for instance watcher.py.
The instructions for running multiple Warriors on one machine may be helpful. However, you should also consider running Docker containers for individual projects rather than the Warrior; these have even less overhead and can be configured with greater concurrency.
What are the alternatives to using the Warrior?
One is running Docker containers for individual projects. This is particularly useful if you want to deploy a large amount of computing power.
Another is running individual projects directly. Check the source repository for the project you're interested in and follow the instructions for running without a Warrior in the README. This is particularly useful if you want to deploy on a machine where you don't have root.
We generally recommend that people use the Warrior, because it is simple for non-technical users to set up and it requires no supervision. You should only use these alternatives if you are comfortable with Linux and prepared to manually intervene when projects begin and end.
I'm looking at the leaderboard. What's that icon beside the username?
That's just the warrior logo: (click on the image for a larger version). It means that that person is using the warrior. Those without the icon are running the project manually.
What's that guy doing in the logo?
The place is on fire! But don't worry, he safely escaped with the rescued data in his arms.
That’s awesome—can I slap this logo on my laptop to show my Internet-preservation pride?
You sure can! The ArchiveTeam Warrior laptop sticker can start conversations about archiving, if you’re into that.
I'd like to help write code or I want to tweak the scripts to run to my liking. Where can I find more info? Where is the source code and repository?
In order to ensure data accuracy, it is imperative that users contributing to Archive Team projects do not modify the project scripts. If you would like to propose improvements to be included in future official versions of/updates to project scripts or would like to use our code for non-Archive Team projects, check out the Dev documentation for details on the infrastructure and details of the source code layout.
I still have a question!
Check out the general FAQ page. Talk to us on IRC. Use #warrior for specific warrior questions or #archiveteam-bs for general questions.
I'm getting errors when I try to launch the VM.
If you are receiving
Breakpoint has been reached (0x80000003),
A critical error has occurred while running the virtual machine and the machine execution has been stopped., or VT-X errors, you probably do not have virtualization enabled, either because it is turned off in your computer's BIOS or your CPU does not support it.
You can check CPU support on Linux with
cat /proc/cpuinfo | grep "(vmx|svm)" | uniq. If there is a line of output starting with "flags", your processor supports virtualization; if there is no output, it does not. You can check whether virtualization is enabled in the BIOS using the
rdmsr utility in your distro's
You can check support and BIOS status on Windows using Microsoft's Hardware-Assisted Virtualization Detection Tool or VirtualChecker.
To enable virtualization on a CPU with support, reboot the computer and enter the BIOS. The virtualization setting is usually under something like 'CPU configuration' or 'advanced settings'.
I can't connect to localhost.
The application is configured to set up port forwarding to the guest machine, and you should be able to access the interface through your web browser at port 8001. If this does not happen, and isn't resolved by rebooting the warrior (using the ACPI power signals, not suspend/save state and resume), you may need to double-check your machine's network settings (as described above).
Make sure you invoked
docker run with the option
--publish. To access the web interface at http://localhost:X/, you must use
The warrior can't connect to the internet.
This may manifest as the following error:
wget: bad address 'warriorhq.archiveteam.org'
Unable to access the Internet
It's possible that the virtual machine has picked up the address of the local DNS cache on your computer, which the virtual machine does not have access to.
If you experience this on VirtualBox, see this question and answer. Additionally, check to see if "Cable Connected" is unchecked in the advanced settings of the virtual adapter, under the network tab in the virtual machine's settings. Check it if it's unchecked, then save your settings.
Another option is to switch to "Host bridge" under settings of the network adapter. If you do this, you won't be able to connect to 127.0.0.1, instead use the first IP in the list below (without the /32, with :8001 at the end).
I see a message that no item was received.
This means that there is no work available. This can happen for several reasons:
- The project has just finished and someone is inspecting the work done. If a problem is discovered, items may be re-queued and more work will become available.
- You have checked out/claimed too many items. Reduce your concurrency and let others do some of the work too.
- In a rare case, you have been banned by a tracker administrator because there was a problem with your work: you were requesting too much, you were tampering with the scripts, a malfunction has occurred, or your internet connection is "unclean" (see above).
I see a message about rate limiting.
Don't worry. Keep in mind that although downloading the internet for fun and digital preservation are the primary goals of all Archive Team activities, serious stress on the target's server may occur. The rate limit is imposed by a tracker administrator and should not be subverted.
(In other words, we don't want to DDoS the servers.)
If you like, you can switch to another project with less load.
I see a message about code being out of date.
Don't worry. There is a new update ready. You do not need to do anything about this; the Warrior will update its code every hour. If you are impatient, please reboot the warrior and it will download the latest code and resume work.
I'm running a project manually and I see a message about code being out of date.
This happens when a bug in the scripts is discovered. Bugs are unavoidable, especially when the server is out of our control.
If you are running the scripts using Docker, we recommend using Watchtower to check for updates every hour, downloading and installing them when necessary. See the setup instructions in Running Archive Team Projects with Docker for more details.
If you are not running the scripts using the provided Docker images, try the
--auto-update option available in Seesaw version 0.8. However, please be aware that you are now executing code automatically. Be sure to run the scripts in a separate user account for safety.
I see messages about rsync errors.
Uh-oh! Something is not right. Please notify us immediately in the appropriate IRC channel.
I told the warrior to shut down from the interface, but nothing has changed.
The warrior will attempt to finish the current running tasks before shutting down. If you need to shut down right away, go ahead. Your progress will be lost, but the jobs will eventually cycle out to another user.
The warrior is eating all my bandwidth!
On VirtualBox (relatively recent versions), use this command:
VBoxManage bandwidthctl archiveteam-warrior-3.2 add limit --type network --limit 3m
This will limit the warrior to 3Mb/s. (Limit units are
k for kilobit,
m for megabit,
g for gigabit,
K for kilobyte,
M for megabyte, and
G for gigabyte.) Adjust as required. :)
In the latest version of VirtualBox on Windows, the syntax appears to have changed. The correct command now seems to be:
VBoxManage bandwidthctl archiveteam-warrior-3.2 add netlimit --type network --limit 3
For more information, consult the VirtualBox manual (Chapter 6, Section 9).
On VMware (versions 9 and above), select a virtual machine and open
Settings > Hardware > Virtual Network Adapter > Advanced. You can set a bandwidth limit here.
You're out of luck; Docker has no feature for limiting bandwidth.
The Warrior virtual machine is using up disk space, even though it's not running a project!
Virtual machine disk images do not behave like a regular file. There are several ways to safely reclaim space:
- Delete the entire warrior application and re-import it.
- Use the VirtualBox CLI to compact the disk. First, shut down the VM. Then, open a terminal and navigate to the folder where the hard-disk VDI file is stored. Finally, run
VBoxManage modifymedium --compact archiveteam-warrior-v3.2-20210306-disk001.vdi, replacing
archiveteam-warrior-v3.2-20210306-disk001.vdiwith the name of the VDI file in use by the Warrior VM. See the VirtualBox documentation for more details and additional steps to help achieve a better result.
- Use the zerofree program and then clone the disk image. Reattach the cloned disk image.
This issue should not affect Docker containers.
My Warrior crashed, or I had to hard-stop it, and I don't think there's time to retry the tasks.
Please notify us in the project IRC channel, including for stops due to system failures and power outages as well as hard-kills. Do not attempt to start or restart the affected containers. If time is indeed a concern, we can help you save or recover partial data from your Warrior.
(The same applies if your Warrior is still running, but tasks are now stuck—especially if they're stuck because the project has reached its deadline and the target site is now gone. Most projects should handle this gracefully, but contact us if they do not.)
The item I'm working on is downloading thousands of URLs and it's taking hours.
Please notify us in the appropriate IRC channel. You may need to reboot the Warrior.
Why is the default project not working? / Why is a manual project not in the Warrior yet?
Sorry. Sometimes the administrators are too busy...
Why are there no projects?
We finished the ones we were working on! If there are no projects showing, you can help us write one. No projects does not mean there is nothing left to archive!
The instructions to run the software/scripts are awful and they are difficult to set up.
Well, excuuuuse me, princess!
We're not a professional support team so help us help you help us all. See above for bug reports, suggestions, or code contributions.
Where can I file a bug, suggestion, or a feature request?
If the issue is related to the warrior's web interface or the library that grab scripts are using, see seesaw-kit issues. Other issues should be filed into their own repositories.
See Warrior projects.
Are you a coder?
Like the Warrior? Interested in how it works under the hood? Got software skills? Help us improve it!