Difference between revisions of "Rescuing Floppy Disks"

From Archiveteam
Jump to navigation Jump to search
Line 84: Line 84:
** [http://mith.umd.edu/vintage-computers/fc5025-operation-instructions Use Guide for the FC5025 Floppy Disk Controller] by the Maryland Institute for Technology in the Humanities
** [http://mith.umd.edu/vintage-computers/fc5025-operation-instructions Use Guide for the FC5025 Floppy Disk Controller] by the Maryland Institute for Technology in the Humanities
** [http://ascii.textfiles.com/archives/2503 A Review of the FC5025] by Jason Scott
** [http://ascii.textfiles.com/archives/2503 A Review of the FC5025] by Jason Scott
** [http://www.spellboundblog.com/2011/07/25/rescuing-5-25-floppy-drives-from-oblivion/ Rescuring 5.25" Floppy Drives from Oblivion] by Spellbound Blog
** [http://www.spellboundblog.com/2011/07/25/rescuing-5-25-floppy-drives-from-oblivion/ Rescuing 5.25" Floppy Drives from Oblivion] by Spellbound Blog
* ZoomFloppy
* ZoomFloppy
** [http://store.go4retro.com/products/ZoomFloppy.html ZoomFloppy Product Page]
** [http://store.go4retro.com/products/ZoomFloppy.html ZoomFloppy Product Page]

Revision as of 04:38, 23 January 2012

Disks.jpg

While they were cool-looking, convenient and even somewhat inexpensive after a while, Floppy Disks are out as a medium to store data on home computers. The USB stick, wireless access, the use of the internet, and a whole other range of options have rendered this medium obsolete. That said, a situation now exists where there are millions of these things out in the world, some of them containing rare or unusual pieces of history, and so there's a lot of benefit to getting all that old data off that medium.

This page is meant to be a clearinghouse for various options that a person or group of reasonable technical ability could use to rescue data from floppy disks. If any of these options seem daunting, a number of people have offered to accept floppy disks and pull the data using these tools.

None of these options should be considered endorsements, and Archive Team does not earn commission from the sale of these items.

Some Basic Thoughts on Floppy Disks

There are three different main sizes of floppy disks that had the most traction:

  • 8" Disks
  • 5 1/4" Disks
  • 3 1/2" Disks

8" floppies fell out of favor relatively quickly in favor of the 5 1/4" versions. In the late 1980s, 3 1/2" overtook 5 1/4" as the dominant format, but a lot of machines, such as the Commodore 64, Atari 810, IBM PC, Kaypro, Apple II and II, and a range of others all supported the 5 1/4" primarily.

All floppies work on the same principle: a magnetic disc with a hole in the middle is inside a case, and a disk drive reads the magnetic data off the disc. Some aspects changed - where 8" and 5 1/4" discs had no built-in protection for the magnetic face of the disc except a paper cover, the 3 1/2" versions had a small spring-loaded door that was opened by the disk drive.

Storage could make a huge difference in the lifespan of Floppies, and a pile of disks put inside a box that was stored in a low humidity, non-extreme-temperature environment could last a lot longer than a floppy used constantly that was left on top of a computer monitor for weeks.

We're going to assume you're just trying to take a pile of disks from however far back and transfer the data onto something more recent. In all cases, try and avoid throwing out the original disks after doing transfer, as you might find that the transfer you've done is missing information, or that technology might have shifted in the meantime, allowing better extraction of the data.

Methods of Transfer (Hardware)

There are currently multiple ways to transfer a lot of floppy disks, some involving original hardware and others involving customized circuits to use modern hardware to pull the data off the disk.


DiscFerret

The DiscFerret is a device that reads magnetic flux data from disks at a sample rate of up to 100MHz. It has an interface port that can be connected to most common floppy drives, as well as MFM and RLL hard drives. This allows capture of all data, including copy protection, unusual formats, and mastering data. Though the hardware is quite powerful, the software is under heavy development at this time. A complete floppy format analyzer program is in development. All components of the board (including the hardware, firmware, and software) are under an open source license, with source code and hardware designs available at the DiscFerret Mercurial repositories. There is also a support and development IRC channel, #discferret on Freenode. At this time the boards are not available for purchase, but they usually can be bought at the DiscFerret store.

KryoFlux

Kf features.jpg

Another choice a device called the KryoFlux connected to a modern floppy drive (3.5" or 5.25"). This hardware solution utilizes a floppy head to read a floppy disk not as a bunch of data but the actual magnetic flux of the disks themselves. What this translates to, in the vast majority of cases, is a disk image that includes any copy protection, unusual write schemes, or trickery. Naturally it captures the full data of the disk as well, and this is likely overkill if you're digitizing a personal set of files, but it's good to know the option is there. Kryoflux boards are for sale at the Kryoflux site.

CatWeasel

The Individual Computers Catweasel is a PCI card that allows connecting a floppy drive. Just as the DiscFerret and the KryoFlux, it reads disks at the magnetic transition level. It also has SID sockets and Amiga peripheral ports, but the quality and performance of these is disputed and the use is limited. As of 2012, the CatWeasel MK4plus appears to be unavailable for purchase.

FC-5025

A slightly less expensive and more directed version is the FC-5025, from Device Side Data. The FC5025 is a controller board exclusively for use with 5.25" floppy drives. Also consisting of a circuit board with USB and floppy drive connectors, this hardware can read a certain number of disks as well, although there are some disk variations it can't.

ZoomFloppy (C-64 Only)

If you're looking to duplicate just disks for the Commodore 64, the ZoomFloppy from RETRO Innovations will allow you to do so with an original 1541 (and compatibles), 1571 or 1581 disk drive, and plug it via this card into your Windows, Unix, or Mac OSX system. As an extra bonus, it'll allow you to hook up commodore printers to your modern machine, just in case you were looking for that.

There are also the older X1541 series cables but these require a built-in parallel port which most PCs are no longer equipped with.

SIO2PC (Atari Only)

The SIO2PC allows your Atari 800, 130XE, etc to see a PC as another floppy disk drive, making it easy to copy floppies to it, as well as providing a handy way to run your Atari without using a floppy drive. They can be bought various places like AtariMax or you can build your own from the original schematics.

RetroFloppy (Apple Only)

RetroFloppy makes cables allowing an Apple II or III to be hooked up to a modern PC, at which point disks can be copied using the open-source ADTPro software. This method does not support copy-protected disks, however.

FDADAP

The FDADAP is a small adapter that allows connecting a 50-pin 8" floppy drive directly to a standard floppy port. It takes care of the different pinout as well at the TG43 signal, which is needed for writing 8" disks. It has a convenient indicator which shows the current head location.

Methods of Transfer (Volunteers)

If you're interested in volunteering to transfer disks for people, please put your information here.

  • Gene Buckle - geneb@deltasoft.com - I can process Apple II & IIgs disks in 5.25" and 3.5" sizes as well as the Commodore 8 bit media (1541, 1571, 1581). I can also image most 5.25" CP/M formatted disks.

Methods of Transfer (Service)

  • FloppyRecovery.net - This service, run by an archiveteamster, will transfer your disks to CD-ROM or downloadable file for $20 per floppy.

Some Links